
Repair kit Carburetor Zenith 36 VN for Volvo B18A 1961-66
199 kr
Uneven idle, leaks around the float chamber or worn shutter shafts are typical signs that a Zenith VN36 needs attention. This single carburetor is fitted to the single-carburetor version of the B18 (75 bhp) and requires tight sealing surfaces and clean jets to hold the right mixture during both cold starts and a warm motor.

199 kr

71 kr

66 kr

60 kr
PV544, 210, 120, 130

PV444, PV544, 445, 210

PV444, PV544, 120
VN34, VN36
210, 120, 130, 220
PV544, 210, 120, 130
PV444, PV544, 445, 210
30, VIG, VN34, VN36

VN36
VN34, VN36
VN36
VN34, VN36
VN34, VN36
VN34, VN36
24 av 51
This group includes the wear parts and seals that come up during an overhaul: gaskets for flanges and caps, the float, jets, springs, bushings as well as screws, nuts and washers. During a rebuild a common point to check is loose shutter shafts and bushings – false air there causes a high, unstable idle that no amount of adjustment can cure. Also replace the float and needle valve if the fuel level wanders, and renew all gaskets at the same time so the flange against the intake seals tight.
1-3 days US shipping on all stock items
On all parts for your Volvo
Free returns within 90 days
We are here for you and your Volvo