
Extractor Manifold for Volvo 740 / 940
390 kr
Rattling noises in corners and an exhaust pipe that hangs crooked can point to tired rubber hangers and rusty clamps – wear points that cause the joints to start slipping and the connections to blow. This category covers the mounting parts that hold the system in place and sealed on the Volvo 740/760 with the four-cylinder B200F and B230F (version without multi-link rear axle).

390 kr

419 kr

133 kr

66 kr
740, 940

740, 940, 960
240, 740, 760, 780
740, 760, 780
740, 760, 940, 960
740, 760, 780, 940
740, 760, 780, 940

240, 740, 760, 780
240
740, 760, 780, 940
240, 260, 262, 740
850, S70, V70, C70
210, 120, 130, 220
740, 760, 780, 940
740, 760, 780
24 av 32
The group includes clamps, brackets and hangers for the suspension, sealing rings for the joints, plus supports, heat shields, washers and studs that belong to the mounting. When overhauling the exhaust system, the rubber hangers and clamp bolts are common items to check since they often crumble apart – replace them together to reduce the risk of new rattles shortly after fitting. The sealing ring in the joint should be checked and be intact before you tighten the connection, otherwise it can leak again.
1-3 days US shipping on all stock items
On all parts for your Volvo
Free returns within 90 days
We are here for you and your Volvo