About
Cometic MLS Head Gasket 86 mm – Volvo B18
Head gasket from Cometic for Volvo with B18 engine. The gasket consists of three layers of steel, known as MLS (Multi Layer Steel).
The gasket has a diameter of 86 mm and a thickness of 1.15 mm.
Fits
- Volvo with B18 engine
Specification
- Article number: C4287-045
- Manufacturer: Cometic
- Type: Head gasket
- Design: 3-layer MLS
- Material: Multi-layer steel
- Diameter: 86 mm
- Thickness: 1.15 mm
Important installation information
The gasket must be installed dry, without additional sealant or adhesive. Cometic MLS gaskets already have a thin Viton rubber coating on the outer steel layers. Additional sealant can interfere with the function of the gasket.
Both the cylinder head and engine block must be completely flat. The sealing surfaces must also be clean and in good condition.
Good to know
Check the sealing surfaces of the cylinder head and engine block carefully before installation. Follow the correct tightening torque and tightening sequence for the cylinder head bolts.
Cylinder head gasket for Volvo B18 86 mm RACE Cometic
OE no.
Article number
Cometic MLS Head Gasket 86 mm – Volvo B18
Head gasket from Cometic for Volvo with B18 engine. The gasket consists of three layers of steel, known as MLS (Multi Layer Steel).
The gasket has a diameter of 86 mm and a thickness of 1.15 mm.
Fits
- Volvo with B18 engine
Specification
- Article number: C4287-045
- Manufacturer: Cometic
- Type: Head gasket
- Design: 3-layer MLS
- Material: Multi-layer steel
- Diameter: 86 mm
- Thickness: 1.15 mm
Important installation information
The gasket must be installed dry, without additional sealant or adhesive. Cometic MLS gaskets already have a thin Viton rubber coating on the outer steel layers. Additional sealant can interfere with the function of the gasket.
Both the cylinder head and engine block must be completely flat. The sealing surfaces must also be clean and in good condition.
Good to know
Check the sealing surfaces of the cylinder head and engine block carefully before installation. Follow the correct tightening torque and tightening sequence for the cylinder head bolts.
We accept the following payment methods:
