Front brake disc for Volvo Amazon and Volvo P1800. Manufactured as a one-piece design for stable performance and easy installation.
Fits the following models
Volvo Amazon from mid-1963 to 1970
Amazon 4-door from ch.no. 118304–
Amazon 2-door from ch.no. 14342–
Volvo P1800 1963–1969 (ch.no. approx. 7000–30000)
Diameter 268 mm
Thickness 13.1 mm
Design solid (one-piece)
With hub (supplied without wheel bearings)
666525
The brake disc is cast in one piece, unlike the original two-piece design.
The hub around the outer bearing has a slightly larger diameter (67.0 mm). This works with original steel wheels but may cause fitment issues with some aftermarket alloy wheels.
Price is per piece.
Ensure all contact surfaces are clean and free from dirt and grease
Check that calipers and pads move freely
Make sure brake and suspension components are in good condition
Tighten wheel bolts/nuts evenly in a cross pattern using the correct torque
Always replace both brake discs on the same axle
Replacing only one disc may cause uneven braking performance
Always replace brake pads when installing new brake discs
Avoid heavy braking for the first approx. 300 km (200 miles) to allow proper bedding-in
⚠ Always follow the vehicle manufacturer’s instructions during installation. Verify model and configuration before ordering.
OE no.
Article number
Front brake disc for Volvo Amazon and Volvo P1800. Manufactured as a one-piece design for stable performance and easy installation.
Fits the following models
Volvo Amazon from mid-1963 to 1970
Amazon 4-door from ch.no. 118304–
Amazon 2-door from ch.no. 14342–
Volvo P1800 1963–1969 (ch.no. approx. 7000–30000)
Diameter 268 mm
Thickness 13.1 mm
Design solid (one-piece)
With hub (supplied without wheel bearings)
666525
The brake disc is cast in one piece, unlike the original two-piece design.
The hub around the outer bearing has a slightly larger diameter (67.0 mm). This works with original steel wheels but may cause fitment issues with some aftermarket alloy wheels.
Price is per piece.
Ensure all contact surfaces are clean and free from dirt and grease
Check that calipers and pads move freely
Make sure brake and suspension components are in good condition
Tighten wheel bolts/nuts evenly in a cross pattern using the correct torque
Always replace both brake discs on the same axle
Replacing only one disc may cause uneven braking performance
Always replace brake pads when installing new brake discs
Avoid heavy braking for the first approx. 300 km (200 miles) to allow proper bedding-in
⚠ Always follow the vehicle manufacturer’s instructions during installation. Verify model and configuration before ordering.
We accept the following payment methods: