About
Brake Servo Volvo 740 / 760 / 940 / 960 2x8" DBA Non-ABS
Brake servo type 2x8" DBA for Volvo 700 and 900 series vehicles. Designed for cars without ABS.
The brake booster amplifies braking force and provides lighter and more controlled braking.
Fits the following models
Volvo 740 without ABS
Volvo 760 1983–1987 without ABS
Volvo 940 1991–1993 without ABS
Volvo 960 1991–1994 without ABS
Specifications
Type 2x8" DBA
Version Non-ABS
Important information when selecting a 2x8" brake servo
Brake boosters of type 2x8" are available in two different versions. The difference lies in the length of the push rod (plunger) to the master cylinder.
The push rods are not interchangeable between the two versions, so it is important to select the correct model.
If you are unsure which version is installed in the vehicle, loosen the master cylinder, pull it slightly back, and inspect the push rod. It should normally protrude only a few millimeters from the servo housing.
This version has a short operating rod, which protrudes only slightly from the housing.
Always verify model, brake system and version before ordering.
Brake servo for Volvo 740, 760, 940, 960, without ABS
253.00 $/pcs
Gross price (excl. VAT)
Available
OE no.
3516094
1273751
Article number
51609705
Brake Servo Volvo 740 / 760 / 940 / 960 2x8" DBA Non-ABS
Brake servo type 2x8" DBA for Volvo 700 and 900 series vehicles. Designed for cars without ABS.
The brake booster amplifies braking force and provides lighter and more controlled braking.
Fits the following models
Volvo 740 without ABS
Volvo 760 1983–1987 without ABS
Volvo 940 1991–1993 without ABS
Volvo 960 1991–1994 without ABS
Specifications
Type 2x8" DBA
Version Non-ABS
Important information when selecting a 2x8" brake servo
Brake boosters of type 2x8" are available in two different versions. The difference lies in the length of the push rod (plunger) to the master cylinder.
The push rods are not interchangeable between the two versions, so it is important to select the correct model.
If you are unsure which version is installed in the vehicle, loosen the master cylinder, pull it slightly back, and inspect the push rod. It should normally protrude only a few millimeters from the servo housing.
This version has a short operating rod, which protrudes only slightly from the housing.
Always verify model, brake system and version before ordering.
We accept the following payment methods:
