About
Wheel Valve TR415 / Snap-in Valve 42.5 mm – OE 313415
Heavy-duty rubber valve for tubeless tires with a larger valve hole in the wheel. Suitable for steel wheels on classic Volvo models from the 1960s as well as vans, motorhomes and other vehicles where standard valves do not fit.
The valve is made from durable EPDM rubber that withstands heat, weather and aging better than cheaper valves. Every valve is leak tested before delivery.
Fits wheels with a 15.7 mm valve hole.
Product information
OE number: 313415
Valve type: Snap-in / rubber valve
Length: 42.5 mm
Hole diameter: 15.7 mm (0.625")
Color: Black
Maximum pressure: 4.5 bar / 65 PSI
For air and nitrogen
Price per piece
Benefits
Fits larger valve holes than standard valves
Heavy-duty valve core with good airflow
EPDM rubber helps prevent cracking and wear
Good choice for older steel wheels, vans and motorhomes
Additional information
This is a universal part and is not designed for one specific vehicle model. Fitment may vary depending on wheel type and application.
Important during installation
Use mounting paste or tire paste during installation. Regular oil may damage the rubber.
Install the valve with a valve puller until it snaps into place in the wheel.
Always replace valves when changing tires, as rubber ages over time and may crack.
Valve for rim for Volvo 1960s
3.20 $/pcs
Gross price (excl. VAT)
Available
OE no.
313415
Article number
31606494
Wheel Valve TR415 / Snap-in Valve 42.5 mm – OE 313415
Heavy-duty rubber valve for tubeless tires with a larger valve hole in the wheel. Suitable for steel wheels on classic Volvo models from the 1960s as well as vans, motorhomes and other vehicles where standard valves do not fit.
The valve is made from durable EPDM rubber that withstands heat, weather and aging better than cheaper valves. Every valve is leak tested before delivery.
Fits wheels with a 15.7 mm valve hole.
Product information
OE number: 313415
Valve type: Snap-in / rubber valve
Length: 42.5 mm
Hole diameter: 15.7 mm (0.625")
Color: Black
Maximum pressure: 4.5 bar / 65 PSI
For air and nitrogen
Price per piece
Benefits
Fits larger valve holes than standard valves
Heavy-duty valve core with good airflow
EPDM rubber helps prevent cracking and wear
Good choice for older steel wheels, vans and motorhomes
Additional information
This is a universal part and is not designed for one specific vehicle model. Fitment may vary depending on wheel type and application.
Important during installation
Use mounting paste or tire paste during installation. Regular oil may damage the rubber.
Install the valve with a valve puller until it snaps into place in the wheel.
Always replace valves when changing tires, as rubber ages over time and may crack.
We accept the following payment methods:
