About
Brake Drum Rear Volvo PV / Duett / Amazon / P1800 (228 mm)
Solid cast rear brake drum designed for Volvo models with rear drum brakes. Provides a durable and original-style solution for standard use.
Fits the following models
Volvo PV
Volvo Duett
Volvo Amazon
Volvo P1800
Specifications
Inner diameter 228 mm
Center bore 24 mm
Keyway width 6 mm
Design solid cast (one-piece)
OEM / Reference number
673797
Information
Not intended for sport or heavy-duty use.
For vehicles with external brake adjustment, an adjustment hole must be drilled in the drum.
For early Volvo PV and Duett models (up to approx. 1957), different thread directions were used on wheel studs. New brake drums are supplied with right-hand threaded studs, which may require new wheel nuts.
Installation (summary)
-
Ensure all mating surfaces are clean and free from rust and grease
-
Align the keyway in the drum and axle correctly
-
Check proper fit of the key before installation
-
Tighten the crown nut to 120 Nm and secure with a split pin
-
⚠ Always verify brake type and dimensions before ordering.
Rear brake drum for Volvo PV444, PV544, Amazon, 1800
105.00 $/pcs
Gross price (excl. VAT)
Available
OE no.
673797
667235
667100
Article number
51596534
Bränslesystem (pv_b18 s.195) (pos 22)Bränslesystem (pv_b18 s.197) (pos 22)Bromsar (pv_b16 s.176) (pos 28)Hjulupphängning (pv_b16 s.172) (pos 28)Hjulupphängning (pv_b16 s.173) (pos 28)pv_b16 sida 172 (pos 28)pv_b16 sida 173 (pos 28)pv_b16 sida 176 (pos 28)pv_b18 sida 195 (pos 22)pv_b18 sida 197 (pos 22)
Brake Drum Rear Volvo PV / Duett / Amazon / P1800 (228 mm)
Solid cast rear brake drum designed for Volvo models with rear drum brakes. Provides a durable and original-style solution for standard use.
Fits the following models
Volvo PV
Volvo Duett
Volvo Amazon
Volvo P1800
Specifications
Inner diameter 228 mm
Center bore 24 mm
Keyway width 6 mm
Design solid cast (one-piece)
OEM / Reference number
673797
Information
Not intended for sport or heavy-duty use.
For vehicles with external brake adjustment, an adjustment hole must be drilled in the drum.
For early Volvo PV and Duett models (up to approx. 1957), different thread directions were used on wheel studs. New brake drums are supplied with right-hand threaded studs, which may require new wheel nuts.
Installation (summary)
-
Ensure all mating surfaces are clean and free from rust and grease
-
Align the keyway in the drum and axle correctly
-
Check proper fit of the key before installation
-
Tighten the crown nut to 120 Nm and secure with a split pin
-
⚠ Always verify brake type and dimensions before ordering.
This does not fit at all
We accept the following payment methods:
