About
B18 Standard Piston Ring Set – Complete Set for 1 Engine
Complete standard-size piston ring set for Volvo B18 engines. The kit contains piston rings for all four pistons and is suitable for Volvo PV, Duett, Amazon, P1800 and 140 models equipped with the B18 engine.
Fits the following models
- Volvo PV with B18
- Volvo Duett with B18
- Volvo Amazon with B18
- Volvo P1800 with B18
- Volvo 140 with B18
Specifications
- Part Number: 275282
- Engine: B18
- Size: Standard (STD)
- Cylinder bore: 84.14 mm
- Ring sizes: 2.00 – 2.00 – 4.76 mm
- Contents: Complete set for 4 pistons / 1 engine
- Volvo OE Number: 275282
Reference / OEM Numbers:
P1174.000, 50471, 50471STD, 50471-STD, 8951150000, 1174-STD
Important Installation Information
When replacing piston rings, the cylinders should be honed to provide the correct surface for the new rings to bed in properly. If the cylinders are not honed, poor sealing and reduced compression may result.
After installation, the engine should be run in carefully. Avoid high RPM and heavy loads immediately after replacing the piston rings. A good starting procedure is to run the engine at an increased idle speed of approximately 1,500 RPM for 30–60 minutes, followed by a careful running-in period.
- Qty per car
- 4
- Technical info
- Standard, Kit for 1 Piston
B18 Standard Piston Ring Set – Complete Set for 1 Engine
OE no.
Article number
B18 Standard Piston Ring Set – Complete Set for 1 Engine
Complete standard-size piston ring set for Volvo B18 engines. The kit contains piston rings for all four pistons and is suitable for Volvo PV, Duett, Amazon, P1800 and 140 models equipped with the B18 engine.
Fits the following models
- Volvo PV with B18
- Volvo Duett with B18
- Volvo Amazon with B18
- Volvo P1800 with B18
- Volvo 140 with B18
Specifications
- Part Number: 275282
- Engine: B18
- Size: Standard (STD)
- Cylinder bore: 84.14 mm
- Ring sizes: 2.00 – 2.00 – 4.76 mm
- Contents: Complete set for 4 pistons / 1 engine
- Volvo OE Number: 275282
Reference / OEM Numbers:
P1174.000, 50471, 50471STD, 50471-STD, 8951150000, 1174-STD
Important Installation Information
When replacing piston rings, the cylinders should be honed to provide the correct surface for the new rings to bed in properly. If the cylinders are not honed, poor sealing and reduced compression may result.
After installation, the engine should be run in carefully. Avoid high RPM and heavy loads immediately after replacing the piston rings. A good starting procedure is to run the engine at an increased idle speed of approximately 1,500 RPM for 30–60 minutes, followed by a careful running-in period.
We accept the following payment methods:
