Screw M8-1.25x20 for Volvo 240, 340, 850, 940
164, 240, 260, 740, 780, 760, V90, 960, 940, S90, 850, V70, XC70, S70, C70
$ 0.34
- Dimensions:
- L 20 mm (3/4")
- Thread:
- M8x1.25
Inlet pipe Volvo 240 (B21F LH-jet/B23F)
Rough idle, false air and a whistle under throttle often trace back to an intake that no longer seals against the cover. On the B21F with LH-Jetronic and on the B23F, the seal works hard between hot and cold cycles, and both gaskets and fasteners tire over the years. This category gathers the parts that belong to the inlet manifold itself and its mounting on the four-cylinder 240 motors.
- Screw M8-1.25x20 for Volvo 240, 340, 850, 940
- Nut M5-0.8x3.8 for Volvo PV, Duett, Amazon, 1800, 240, 260, 740, 760, 780, 850, 940, 960, C70, S40, S70, S90, V40, V70, V90
- Wave washer 5.3 x 11 x 0.5 mm
- Washer 8.4x16x1.5 for Volvo PV444, PV544, Duett, Amazon, 1800
- Nut M8-1.25x6.2 for Volvo 740, 760, 940
All products in category: Inlet pipe Volvo 240 (B21F LH-jet/B23F)
Nut M5-0.8x3.8 for Volvo PV, Duett, Amazon, 1800, 240, 260, 740, 760, 780, 850, 940, 960, C70, S40, S70, S90, V40, V70, V90
PV 444, Duett, PV 544, Amazon, 1800, 164, 780, S90, S70, C70
$ 0.23
- Model year:
- 1957–1974
- Thread:
- M5x0.8
- Engine:
- B16, B18, B20
- System:
- Zenith
Wave washer 5.3 x 11 x 0.5 mm
Amazon, 1800, 164, 140, 240, 260, 740, 780, S90, 850, S70, C70
$ 0.11
- Model year:
- 1961–1974
- Dimensions:
- Ø 11 mm, Inner Ø 5.3 mm, T 0.5 mm
- Thread:
- M5
- Engine:
- B18, B20
Washer 8.4x16x1.5 for Volvo PV444, PV544, Duett, Amazon, 1800
PV 444, Duett, PV 544, Amazon, 1800, 164, 780, S90, S70, C70
$ 0.11
- Model year:
- 1957–1989
- Axle:
- Front axle
- Dimensions:
- 5/16“
- Engine:
- B16, B18, B20, B21A, B21E, B23A, B23E
Nut M8-1.25x6.2 for Volvo 740, 760, 940
PV 444, PV 544, Duett, Amazon, 1800, 164, S90
$ 0.11
- Model year:
- 1961–1989
- Engine:
- B18, B20, B21A, B21E, B23A, B23E, B27F
Fast delivery
1 year warranty
On all parts for your Volvo
90-day returns
90-day right of return from delivery
Volvo expertise since 1999
We're here for you and your Volvo
The group includes gaskets and seal rings against the manifold and flanges, plus studs, nuts, screws and hex. socket screws that fasten the pipe. There are also nipples for vacuum and fuel connections, and rods that support the assembly. During a rebuild, a common check is to replace the gasket while inspecting studs and nut threads – a worn thread or hardened gasket easily causes a new vacuum leak shortly after reassembly. Note that the B21F and B23F can differ in details around mounting and connections.