Welcome to an all-new Volvo experience and our new website.Read our guideGet a new passwordContact us if you have any problems

Skip to content

Exhaust system Volvo 740 (B28F)

Rusted-through pipe joints, leaking gaskets at the manifold and cracked rubber hangers that let the exhaust pipe knock against the underbody are among the most common reasons to look over the exhaust system on a 740 with the V6 motor B28F. It is often the mountings and joints – not the pipes themselves – that give out first, and then it pays to replace seals and fittings at the same time.

All products in category: Exhaust system Volvo 740 (B28F)

Scale plate for Volvo 740, 850, 940

Wave Washer 10 x 18 x 1 mm

PV 444, PV 544, Duett, Amazon, 1800, 164, 140, 240, 260, 740, 780, 760, 940, 960

$ 0.23
Model year:
1961–1974
Dimensions:
Ø 18 mm, Inner Ø 10 mm, T 1 mm
Engine:
B18, B20
System:
Spicer
Show more

OE numbers

942336
Bricka 6x19x1,0 till Volvo Amazon Kombi, 1800, Volvo OE 960140

Washer 6x19x1.0 for Volvo PV, Duett, Amazon, 1800, 164, 240, 740, 850, 940

PV 444, PV 544, Duett, Amazon, 1800, 140, 164, 240, 260, 740, 780, 760, V90, S90, 960, 940, 850, V70, XC70, S70, C70

$ 0.11
Model year:
1961–1974
Dimensions:
6 × 19 × 1.0 mm
Engine:
B18, B20

OE numbers

960140
Bricka M6 & 1/4" 6,7x14x1,5 till Volvo Amazon, Amazon Kombi, 1800, Volvo OE 955893, art.nr 181596030

Washer M6 & 1/4" 6.7x14x1.5 for Volvo Amazon, 140, 164, 1800, 240, 260, 740, 760, 780, 940, 960, S40, V40

PV 444, PV 544, Duett, Amazon, 1800, 164, 780, S90

$ 0.11
Model year:
1957–1982
Axle:
Front axle
Dimensions:
6.7 × 14 × 1.5 mm
Thread:
M6
Show more

OE numbers

955893

Fast delivery

1 year warranty

On all parts for your Volvo

90-day returns

90-day right of return from delivery

Volvo expertise since 1999

We're here for you and your Volvo

The category includes exhaust kits as well as wear parts such as gaskets, braces, hangers, clamps, lock nuts, washers and wave washers. During a rebuild the rubber hangers and flange gaskets are typical check points – replace them along with a pipe change so you avoid uneven load on the new joints. Wave washers and lock nuts keep the joints tensioned despite heat movement, and the right brace and clamp give a tight joint without welding.