Carburettor for Volvo 240
260, 240
$ 1,525.39
Carburetor Volvo 240 (1979-84)
Rough idle, poor cold starts or rising fuel consumption on a B21-equipped 240 are often caused by tired gaskets and worn jets in the carburetor. This category gathers the parts needed when rebuilding and fine-tuning the carburetor on model years 1979–84.
- Carburettor for Volvo 240
- Carburettor B21A for Volvo 240, 245
- Lid for Volvo 740, 760
- Cold start device for Volvo 240, 245, 260, 265 B21FT, D24
- Solenoid valve for Volvo 240, 245, 260, 265
- Vacuum valve for Volvo 240, 740, 760, D24
- Nozzle for Volvo 740, 760
- Carburettor jet for Volvo 240, 260, 262, 740, 760, B21, B23, B230
- Injector for Volvo 240, 740, 760
- Fuel needle 175CDUS, PN for Volvo 240 B21A 1981-84
- Throttle shaft for Volvo 240, 740
- Throttle disc for Volvo 240, 740, 760
- Control roller for Volvo 240, 245, 260, 265
- Shock absorber for Volvo 240, 740
- Repair kit for Volvo 240, 740
- Adjusting screw for Volvo 240, 740, 760
- Repair kit for Volvo 240, 245, 260, 265, 1979-87
- Jet needle 175CDUS DC for Volvo 240, 245, 260, 265, 1981-87
- Carburettor spring for Volvo 740, 760
- Needle valve 175 CDUS 2.5 for Volvo 240, 740, 760, 1982-87
All products in category: Carburetor Volvo 240 (1979-84)
Carburettor B21A for Volvo 240, 245
240
$ 892.14
- System:
- Pierburg DVG
Lid for Volvo 740, 760
260, 240, 760, 740
$ 245.66
Cold start device for Volvo 240, 245, 260, 265 B21FT, D24
260, 240
$ 235.94
Solenoid valve for Volvo 240, 245, 260, 265
260, 240
$ 205.89
- System:
- Solex
Vacuum valve for Volvo 240, 740, 760, D24
260, 240, 740, 760
$ 126.00/piece
- System:
- Pierburg DVG
- Info:
- With washer, With hose
Nozzle for Volvo 740, 760
260, 240, 760, 740
$ 112.44
-5%
Carburettor jet for Volvo 240, 260, 262, 740, 760, B21, B23, B230
260, 240, 760, 740
$ 95.86
$ 100.91
You save 5%
- Model year:
- 1975–1998
- Engine:
- B21, B23, B230
- System:
- Pierburg DVG
Injector for Volvo 240, 740, 760
260, 240, 760, 740
$ 85.32
-10%
Fuel needle 175CDUS, PN for Volvo 240 B21A 1981-84
260, 240
$ 70.68
$ 78.54
You save 10%
- Model year:
- 1981–1984
- Engine:
- B21A
- System:
- Pierburg DVG
Throttle shaft for Volvo 240, 740
260, 240, 760, 740
$ 73.11
Throttle disc for Volvo 240, 740, 760
260, 240, 760, 740
$ 73.11
-10%
Control roller for Volvo 240, 245, 260, 265
260, 240
$ 55.43
$ 61.59
You save 10%
Shock absorber for Volvo 240, 740
260, 240, 740
$ 54.01
Repair kit for Volvo 240, 740
260, 240, 740
$ 51.42/piece
Adjusting screw for Volvo 240, 740, 760
260, 240, 760, 740
$ 48.36
Repair kit for Volvo 240, 245, 260, 265, 1979-87
260, 240
$ 44.97/piece
-10%
Jet needle 175CDUS DC for Volvo 240, 245, 260, 265, 1981-87
260, 240
$ 38.34
$ 42.60
You save 10%
- Model year:
- 1981–1987
- Engine:
- B230
- System:
- Pierburg DVG
Carburettor spring for Volvo 740, 760
260, 240, 760, 740
$ 39.32
Needle valve 175 CDUS 2.5 for Volvo 240, 740, 760, 1982-87
260, 240, 760, 740
$ 38.99
- Model year:
- 1982–1987
- Dimensions:
- Ø 2.5 mm
- Engine:
- B21, B23
- System:
- Pierburg DVG
Fast delivery
1 year warranty
On all parts for your Volvo
90-day returns
90-day right of return from delivery
Volvo expertise since 1999
We're here for you and your Volvo
The group includes jets and adjusting screws for setting the idle mixture and stroke, plus gaskets and plugs that seal between the carburetor body and the intake. There are also springs, washers, screws and caps that belong to the recurring wear points.
A common check point during a rebuild is the adjusting screws and the gasket set – leaking gaskets cause false air and an idle that is hard to adjust. The parts are gathered for the 240 with the four-cylinder OHC B21-type motor; always check the carburetor's design against your car before replacing parts, as jets and adjustment parts differ between variants.