Camshaft kit profile K for Volvo B30

K-Profile Camshaft Kit for Volvo B30

Factory-manufactured K-profile camshaft kit for Volvo B30 engines. The camshaft is suitable for mild engine tuning and works well with both original carburettors and fuel injection.

The K-profile provides an estimated power increase of approximately 25–40 hp, depending on the engine's other components and settings.

Fits the following Volvo engines

Volvo B30, excluding marine engines

Specifications

Product type: Camshaft kit

Camshaft profile: K

Engine: B30

Version: Factory-manufactured

Estimated power increase: Approximately 25–40 hp

Valve clearance: 0.45–0.50 mm with a warm engine

Camshaft nut tightening torque: 80 Nm with Loctite

Important Installation Information

Always install new valve lifters together with the camshaft. Use assembly paste containing molybdenum disulphide during installation.

The warranty is only valid if new valve lifters are purchased and installed together with the camshaft.

Always use a locking tab washer or Loctite to secure the camshaft nut.

Pay Attention to the Spacer Ring Position

Make sure the spacer ring, part number 418363, is correctly positioned on the camshaft before installation.

Incorrect positioning of the spacer ring may damage or break the camshaft.

Important Information

Check that all mounting components are correctly positioned and follow the engine installation instructions.

Product Information

Part number: 430014

Price per piece.