Warm-up regulator, K-Jetronic, for Volvo 240, 260, 740, 940
240, 260, 740, 760, 960, 940
$ 732.81
- Model year:
- 1974–1989
- Engine:
- B21E, B21F, B23E, B27F
- System:
- K-Jetronic
Fuel system Volvo 940/960 Miscellaneous
Rough idling, poor cold starting or a glowing engine light often begins in the sensors and seals around the fuel and intake system. This category gathers the other parts on the Volvo 940/960 that don't belong under pump, tank or pipe, but that still control how cleanly and steadily the engine runs.
- Warm-up regulator, K-Jetronic, for Volvo 240, 260, 740, 940
- Fuel return pipe, engine to tank, for Volvo 740, 940, 960
- Control unit for Volvo 240 B200F, B230F 1989-, 940 B230FT, B230GT 1991
- Solenoid valve for Volvo 140, 240, 740, 940
- Lambda sensor for Volvo 240 1985-93, 740 1985-90
- Pressure regulator for Volvo 240, 740, 760, 780, 940, 960, 240 1989-, 740 1984-92, 940 1991-97
- Lambda sensor for Volvo 240, 740, 760, 780, 940, 960, B200, B230, B234FS 1989-93
- Injector valve for Volvo B19, B21, B23
- Throttle switch for Volvo 240, 740, 760, 780, 940, 960, 240 1984-93, 740 1986-92, 960 1991-97
- Service kit for Volvo B200, B204E, B230E, B230F, B230K, B234F, B234K
- Fuel filter for Volvo 240, 740, 760, 940, 1981-94
- Seal kit injection LH-Jetronic for Volvo 740, 940, 960
- Fuel pipe fitting for Volvo PV544, Duett, Amazon Wagon, 1800
- Hose for Volvo 850, 940
- Crankcase ventilation hose, ID 3 mm, OD 5 mm, universal
- Turbo oil line gasket for Volvo 740, 760, 780, 940, 960
- Flame trap, synthetic, for Volvo 240, 740, 760, 850, 940
- Fuel pipe clamp for Volvo 740, 760, 780, 940, 960, S90, V90, V90 1982-98
- Fuel pipe clips for Volvo 940, 960
- Oil return gasket for Volvo 240, 740, 760, 780, 940, 960
Choose your model
All products in category: Fuel system Volvo 940/960 Miscellaneous
Fuel return pipe, engine to tank, for Volvo 740, 940, 960
740, 960, 940
$ 201.71
- Mounting position:
- Engine to fuel tank outlet, Rear section
- Info:
- For car with rigid rear axle
Control unit for Volvo 240 B200F, B230F 1989-, 940 B230FT, B230GT 1991
240, 940, 340, 360
$ 191.54
- Model year:
- 1989–
- Engine:
- B200F, B230F, B230FT, B230GT
Solenoid valve for Volvo 140, 240, 740, 940
240, 260, 740, 760, 940, 960
$ 163.96
- Model year:
- 1974–1982
- Engine:
- B27
Lambda sensor for Volvo 240 1985-93, 740 1985-90
240, 260, 740, 760
$ 151.99
- Model year:
- 1985–1993
Pressure regulator for Volvo 240, 740, 760, 780, 940, 960, 240 1989-, 740 1984-92, 940 1991-97
240, 740, 780, 760, 940, 960
$ 132.10
- Model year:
- 1989–
- Engine:
- B200, B230, B230FD, B234
Lambda sensor for Volvo 240, 740, 760, 780, 940, 960, B200, B230, B234FS 1989-93
240, 740, 760, 780, 960, 940, 340, 360
$ 101.14
- Model year:
- 1989–1993
- Engine:
- B200, B230, B234FS
Injector valve for Volvo B19, B21, B23
240, 740, 760, 940, 960, 340, 360
$ 90.97
- Mounting position:
- Cylinders 1-4
- Model year:
- 1975–1989
- Engine:
- B19, B21, B23
- Info:
- Without seals
Throttle switch for Volvo 240, 740, 760, 780, 940, 960, 240 1984-93, 740 1986-92, 960 1991-97
240, 260, 740, 780, 760, V90, 940, S90, 960
$ 62.15
- Model year:
- 1984–1993
- Engine:
- B200F, B230F, B23F
Service kit for Volvo B200, B204E, B230E, B230F, B230K, B234F, B234K
240, 740, 760, 940, V90, 960, S90, 340-360
$ 35.82/set
- Engine:
- B200, B204E, B230E, B230F, B230K, B234F, B234K
Fuel filter for Volvo 240, 740, 760, 940, 1981-94
240, 260, 740, 780, 760, V90, 960, 940, S90
$ 14.13
- Model year:
- 1981–1994
- Engine:
- B200E, B200F, B21E, B21ET, B21F, B21FT, B230E, B230F, B23E, B23F
Seal kit injection LH-Jetronic for Volvo 740, 940, 960
240, 740, 780, 760, 940, 960
$ 10.74/kit
- Model year:
- 1979–1998
- Engine:
- B200, B200F, B230F, B230FD, B23ET, B23F
- System:
- LH-Jetronic
- Info:
- For one injector
Fuel pipe fitting for Volvo PV544, Duett, Amazon Wagon, 1800
PV 444, Duett, PV 544, Amazon, 1800, 164, 780, S90
$ 8.93
- Model year:
- 1955–1974
- Engine:
- B4B, B14A, B16, B18
- Quantity per car:
- Volvo 1800 B20: 2 pcs · Volvo 740 (1988–90): 1 pcs · Volvo 740 (1991–): 1 pcs · Volvo 740/760 (–1984): 1 pcs · Volvo 740/760 (1985–87): 1 pcs · Volvo 760 (1988–): 1 pcs · Volvo 780: 1 pcs · Volvo 940/960 (1990–1996): 1 pcs · Volvo 940/960 (1994–) & S90/V90 (1997–): 1 pcs · Volvo Duett B16: 1 pcs · Volvo PV/Duett B18: 1 pcs
Hose for Volvo 850, 940
240, 260, 740, 760, V90, 940, S90, 960, 850, V70, XC70, S70, C70
$ 8.48/sold by the metre
Crankcase ventilation hose, ID 3 mm, OD 5 mm, universal
740, 780, 760, V90, 960, 940, S90, 850, V70, XC70, S70, C70
$ 7.80/sold by the metre
- Dimensions:
- Inner Ø 3 mm, Outer Ø 5 mm
- Colour:
- Black
Turbo oil line gasket for Volvo 740, 760, 780, 940, 960
740, 780, 760, V90, 940, 960, S90
$ 6.67
- Mounting position:
- Oil return pipe to sump
- Type:
- Gasket
Flame trap, synthetic, for Volvo 240, 740, 760, 850, 940
740, 780, 760, V90, 940, S90, 960, 850, V70, XC70, S70, C70, S60, XC90, V60, V40, S80
$ 6.10
- Type:
- O-ring
Fuel pipe clamp for Volvo 740, 760, 780, 940, 960, S90, V90, V90 1982-98
740, 780, 760, V90, 940, S90, 960
$ 4.97
- Type:
- Clip
Fuel pipe clips for Volvo 940, 960
V90, 960, S90, 940
$ 4.80
- Mounting position:
- Fuel distribution pipe
- Quantity per car:
- Volvo 940/960 (1990–1996): 1 pcs · Volvo 940/960 (1994–) & S90/V90 (1997–): 2 pcs
Oil return gasket for Volvo 240, 740, 760, 780, 940, 960
240, 260, 740, 780, 760, V90, 940, S90, 960
$ 4.75
- Mounting position:
- Turbocharger oil return pipe
- Model year:
- 1975–1985
- Engine:
- B21ET, B21FT
- Type:
- Gasket
Fast delivery
1 year warranty
On all parts for your Volvo
90-day returns
90-day right of return from delivery
Volvo expertise since 1999
We're here for you and your Volvo
The group includes lambda sensors and air mass meters that affect the mixture ratio, fuel filters that catch particles before injection, plus a flame shield for safe ventilation. There are also seals, gaskets, seal rings and fasteners – the small parts that easily become brittle over the years and cause air leaks or moisture in the wrong place.
A typical check point during troubleshooting is to replace seal rings and gaskets at the same time the sensor is removed; a hardened rubber ring readily leaks false air and produces the same symptoms as a tired lambda sensor. New fasteners ensure that hoses and connectors stay put after reassembly.