About
Intake / Exhaust Manifold Gasket B20E / B20F 1971–1975
Fits the following models
- Volvo P1800E
- Volvo P1800ES
- Volvo 140
Fits engines
- B20E
- B20F
Specifications
- Type: Intake / exhaust manifold gasket
- Position: Cylinder head – intake / exhaust manifold
- Weight: 50 g
- Larger intake ports than MG911
- Diameter: Ø42.5 mm
- Suitable for tuning applications
- Manufactured by: Dana Glase
- Country of manufacture: Spain
OEM / Reference Number
- 419764
- 1378912
Information
Gasket for intake and exhaust manifold systems for Volvo B20E and B20F engines. Manufactured for correct fitment and sealing according to original specifications.
Fits Volvo 140, P1800 and P1800ES models equipped with B20E/B20F engines.
Recommended installation hardware
- 8 pcs. stud bolt 45 mm – 953241
- 1 pc. stud bolt 50 mm – 953243, also mounting point for rear water pipe clamp
- 6 pcs. forged washer – 191169
- 3 pcs. corrugated washer – 955921
- 9 pcs. nut – 955826
Installation instructions
- Only remove manifolds when the engine is cold and loosen nuts from the outside inward.
- Install the gasket with the marking “UT” facing the manifold.
- Install manifolds without tension and tighten nuts from the inside outward in several steps.
- Always replace all stud bolts that loosen during removal.
Important Information
- Always check model, engine, and version before ordering.
Gasket Manifold top B20E, B20F for Volvo 1800, 140, 145 1971-75
21.00 $/pcs
Gross price (excl. VAT)
Available
OE no.
419764
1378912
MG912
Article number
111602601
Intake / Exhaust Manifold Gasket B20E / B20F 1971–1975
Fits the following models
- Volvo P1800E
- Volvo P1800ES
- Volvo 140
Fits engines
- B20E
- B20F
Specifications
- Type: Intake / exhaust manifold gasket
- Position: Cylinder head – intake / exhaust manifold
- Weight: 50 g
- Larger intake ports than MG911
- Diameter: Ø42.5 mm
- Suitable for tuning applications
- Manufactured by: Dana Glase
- Country of manufacture: Spain
OEM / Reference Number
- 419764
- 1378912
Information
Gasket for intake and exhaust manifold systems for Volvo B20E and B20F engines. Manufactured for correct fitment and sealing according to original specifications.
Fits Volvo 140, P1800 and P1800ES models equipped with B20E/B20F engines.
Recommended installation hardware
- 8 pcs. stud bolt 45 mm – 953241
- 1 pc. stud bolt 50 mm – 953243, also mounting point for rear water pipe clamp
- 6 pcs. forged washer – 191169
- 3 pcs. corrugated washer – 955921
- 9 pcs. nut – 955826
Installation instructions
- Only remove manifolds when the engine is cold and loosen nuts from the outside inward.
- Install the gasket with the marking “UT” facing the manifold.
- Install manifolds without tension and tighten nuts from the inside outward in several steps.
- Always replace all stud bolts that loosen during removal.
Important Information
- Always check model, engine, and version before ordering.
We accept the following payment methods:
