Manifold gasket for Volvo 1800, 140, 145, 1971-75, B20E, B20F

Intake / Exhaust Manifold Gasket B20E / B20F 1971–1975

Fits the following models

• Volvo P1800E
• Volvo P1800ES
• Volvo 140

Fits engines

• B20E
• B20F

Specifications

• Type: Intake / exhaust manifold gasket
• Position: Cylinder head – intake / exhaust manifold
• Weight: 50 g
• Larger intake ports than MG911
• Diameter: Ø42.5 mm
• Suitable for tuning applications
• Manufactured by: Dana Glase
• Country of manufacture: Spain

OEM / Reference Number

• 419764
• 1378912

Information

Gasket for intake and exhaust manifold systems for Volvo B20E and B20F engines. Manufactured for correct fitment and sealing according to original specifications.

Fits Volvo 140, P1800 and P1800ES models equipped with B20E/B20F engines.

Recommended installation hardware

• 8 pcs. stud bolt 45 mm – 953241
• 1 pc. stud bolt 50 mm – 953243, also mounting point for rear water pipe clamp
• 6 pcs. forged washer – 191169
• 3 pcs. corrugated washer – 955921
• 9 pcs. nut – 955826

Installation instructions

• Only remove manifolds when the engine is cold and loosen nuts from the outside inward.
• Install the gasket with the marking “UT” facing the manifold.
• Install manifolds without tension and tighten nuts from the inside outward in several steps.
• Always replace all stud bolts that loosen during removal.

Important Information

• Always check model, engine, and version before ordering.