About
Distributor Rotor Volvo B18, B20, B21, B23, B30 – Part No. 243903
Distributor rotor from Beru for Bosch and PAL distributors. An important part of the ignition system that transfers ignition voltage from the distributor cap to the spark plugs.
If the engine runs unevenly, misfires or is difficult to start, a worn distributor rotor may be part of the problem.
Fits the following
Volvo Amazon
- B18
- 1965–
Volvo 140
- 140, 144, 145
- B20E, B20F
- 1968–
Volvo 240
- 244, 245
- B19, B21A, B23A
- 1975–
Volvo 340 & 360
- B19A
- 1981–1983
Also fits engines: B20A, B20B, B20E, B21, B23, B30A
Product information
- Part number: 243903
- Type: Distributor rotor
- Manufacturer: Beru
- System: Bosch / PAL
- Material: Polyester
- Inner diameter: 14.4 mm
- Resistance: 5 kOhm (suppressed)
- With locking clip for top terminal
Important information
- Fits Bosch and PAL distributors
- Suppressed design helps reduce radio interference
- Always inspect the distributor cap and rotor together during ignition system service
Installation
Check that the distributor shaft and distributor cap are in good condition before installation. Replacing the distributor cap at the same time is recommended if it shows signs of wear or corrosion.
- Dimensions
- Ø 14.4 mm
Distributor arm for Volvo B18 1965-, B20A, B20B, B20E, B21, B23, B30A
OE no.
Article number
Distributor Rotor Volvo B18, B20, B21, B23, B30 – Part No. 243903
Distributor rotor from Beru for Bosch and PAL distributors. An important part of the ignition system that transfers ignition voltage from the distributor cap to the spark plugs.
If the engine runs unevenly, misfires or is difficult to start, a worn distributor rotor may be part of the problem.
Fits the following
Volvo Amazon
- B18
- 1965–
Volvo 140
- 140, 144, 145
- B20E, B20F
- 1968–
Volvo 240
- 244, 245
- B19, B21A, B23A
- 1975–
Volvo 340 & 360
- B19A
- 1981–1983
Also fits engines: B20A, B20B, B20E, B21, B23, B30A
Product information
- Part number: 243903
- Type: Distributor rotor
- Manufacturer: Beru
- System: Bosch / PAL
- Material: Polyester
- Inner diameter: 14.4 mm
- Resistance: 5 kOhm (suppressed)
- With locking clip for top terminal
Important information
- Fits Bosch and PAL distributors
- Suppressed design helps reduce radio interference
- Always inspect the distributor cap and rotor together during ignition system service
Installation
Check that the distributor shaft and distributor cap are in good condition before installation. Replacing the distributor cap at the same time is recommended if it shows signs of wear or corrosion.
We accept the following payment methods:

