Cometic race cylinder head gasket for Volvo B21, B200, 92 mm

Cometic MLS Head Gasket 92 mm – Volvo B21, B200

Head gasket from Cometic for Volvo with B21 and B200 engines. The gasket consists of three layers of steel, known as MLS (Multi Layer Steel).

The gasket has a diameter of 92 mm. The openings in the gasket measure approximately 92.3 mm.

Fits

• Volvo with B21 engine
• Volvo with B200 engine

Specification

• Article number: C4498-045
• Manufacturer: Cometic
• Type: Head gasket
• Design: 3-layer MLS
• Material: Multi-layer steel
• Diameter: 92 mm
• Gasket openings: approximately 92.3 mm
• Thickness: 1.15 mm

Important installation information

The gasket must be installed dry, without additional sealant or adhesive. Cometic MLS gaskets already have a thin Viton rubber coating on the outer steel layers. Additional sealant can interfere with the function of the gasket.

Both the cylinder head and engine block must be completely flat. The sealing surfaces must also be clean and in good condition.

Good to know

The MLS gasket is suitable for engine rebuilds and engines where a multi-layer steel gasket is used.

Check the sealing surfaces of the cylinder head and engine block carefully before installation. Follow the correct tightening torque and tightening sequence for the cylinder head bolts.