Lock nut UNC 5/16-18 for Volvo PV, Duett, Amazon, 140, 1800, 240, 260, h=8.5 mm
Amazon, 1800, 164
$ 0.40
- Axle:
- Front axle
- Thread:
- 5/16"-18 UNC
- Surface:
- Zinc-plated
Master cylinder Brake Volvo Amazon 1-Circuit (B18)
A sinking pedal, a falling fluid level or a soft brake after winter storage often points to a worn master brake cylinder. On the 122 with B18 and a single-circuit system it is extra important to keep an eye on the seals – with only one hydraulic circuit an internal or external leak means the entire braking action can be lost at once, not just front or rear.
- Lock nut UNC 5/16-18 for Volvo PV, Duett, Amazon, 140, 1800, 240, 260, h=8.5 mm
- Scissor pin 2 x 20 for Volvo Amazon
- Lock washer 8.4
- Washer 8.4x16x1.5 for Volvo Amazon
- Brake pipe set for Volvo Amazon, 1962-64, 4x drum brake, ENV, left-hand drive, BP51669471
All products in category: Master cylinder Brake Volvo Amazon 1-Circuit (B18)
Scissor pin 2 x 20 for Volvo Amazon
PV 544, Duett, PV 444, Amazon, 1800, 164
$ 0.34
- Mounting position:
- Tie rod end
- Model year:
- 1957–1973
- Axle:
- Front axle
- Engine:
- B16, B18, B20
Lock washer 8.4
Duett, PV 444, PV 544, Amazon, 1800, 164, 780, S90, S70, C70
$ 0.11
Washer 8.4x16x1.5 for Volvo Amazon
Duett, PV 444, PV 544, Amazon, 1800
$ 0.11
- Model year:
- 1957–1974
- Dimensions:
- 5/16“
- Engine:
- B16, B18, B20
- Surface:
- Yellow zinc plated
Brake pipe set for Volvo Amazon, 1962-64, 4x drum brake, ENV, left-hand drive, BP51669471
Amazon
Price unavailable
- Position:
- Left
- System:
- ENV
Fast delivery
1 year warranty
On all parts for your Volvo
90-day returns
90-day right of return from delivery
Volvo expertise since 1999
We're here for you and your Volvo
This category gathers the parts for the single-circuit cylinder on the B18 cars. The group includes complete master cylinders, repair kits with seals, a brake lamp switch, plus screw, washers and clevis pin for mounting and the pedal rod. Plastilube and grease are used to lubricate the piston and boots during assembly so that the rubber does not run dry.
During a rebuild, common check points are the bore's surface finish, the piston clearance and the return spring – if the cylinder bore is scored or pitted, a seal kit alone is rarely enough.