Welcome to an all-new Volvo experience and our new website.Read our guideGet a new passwordContact us if you have any problems

Skip to content

Steering gear servo Volvo 940/960 B6304F LHD

Oil spots under the front end and a power steering system that whines or feels heavy on a cold start can often point to dry O-rings or a cracked return hose. On the 940/960, the soft seals and hose routing around the power steering pump are a common checkpoint when the level in the reservoir drops.

All products in category: Steering gear servo Volvo 940/960 B6304F LHD

Power steering pump reservoir for Volvo 850, 960, C70, S70, S90, V70, V90

Power steering pump reservoir for Volvo 850, 960, C70, S70, S90, V70, V90

V90, 940, S90, 960, 850, V70, XC70, S70, C70

$ 78.54

OE numbers

271386
Return hose, steering gear to pump, for Volvo 240, 260, 262, 740, 760, 780, 940, 960, 1974-93

Return hose, steering gear to pump, for Volvo 240, 260, 262, 740, 760, 780, 940, 960, 1974-93

240, 260, 740, 780, 760, V90, 960, 940, S90

$ 51.87
Info:
For left- and right-hand traffic

OE numbers

1228399
Power steering pump reservoir cap

Power steering pump reservoir cap

960, 850, V70, XC70, S70, C70, S80

$ 21.58

OE numbers

8619303
Banjo bolt M14x1.5 x 26 mm for Volvo 340, 850, 940

Banjo bolt M14x1.5 x 26 mm for Volvo 340, 850, 940

240, 260, 740, 780, 760, V90, 960, S90, 940, 850, V70, XC70, S70, C70

$ 10.74
Dimensions:
Outer Ø 14 mm

OE numbers

968179
Hose clamp 10-17 mm universal

Hose clamp 10-17 mm universal

Amazon

$ 1.81

OE numbers

951786
O-ring for Volvo 240, 850, 960, C70, S40, S70, S80, S90, V40, V70, V90, XC90

O-ring for Volvo 240, 850, 960, C70, S40, S70, S80, S90, V40, V70, V90, XC90

240, V90, 960, S90, 940, 850, V70, XC70, S70, C70, XC90, S40, S60, V40, S80

$ 1.36
Type:
O-ring

OE numbers

969092

Fast delivery

1 year warranty

On all parts for your Volvo

90-day returns

90-day right of return from delivery

Volvo expertise since 1999

We're here for you and your Volvo

This category includes seal and hose parts for the hydraulics: O-rings, return hoses, reservoir with cap, hose clamps and a hollow screw (banjo screw). During a rebuild, the seals and connections should be checked at the same time, since a small leak readily spreads to adjacent fittings. Because the design differs between engine and model-year variants, it is worth comparing against your existing part before replacing it.