Head gasket for Volvo B20, 93 mm, 0.7 mm, Cometic

Cometic MLS Head Gasket 93 mm – Volvo B20, 0.7 mm

Head gasket from Cometic for Volvo with B20 engine. The gasket consists of three layers of steel, known as MLS (Multi Layer Steel).

The gasket has a diameter of 93 mm, a thickness of 0.7 mm, and is intended for engines with a cylinder bore of 92–93 mm.

Fits

• Volvo with B20 engine
• For cylinder bore 92–93 mm

Specification

• Article number: COM-B2093-07
• Manufacturer: Cometic
• Type: Head gasket
• Design: 3-layer MLS
• Material: Multi-layer steel
• Gasket bore: 93 mm
• Thickness: 0.7 mm
• For cylinder bore: 92–93 mm

Important installation information

The gasket must be installed dry, without additional sealant or adhesive. Cometic MLS gaskets already have a thin Viton rubber coating on the outer steel layers. Additional sealant can interfere with the function of the gasket.

Both the cylinder head and engine block must be completely flat. The sealing surfaces must also be clean and in good condition.

Good to know

Check the sealing surfaces of the cylinder head and engine block carefully before installation. Follow the correct tightening torque and tightening sequence for the cylinder head bolts.