$ 866.00
Stainless Steel Sports Exhaust System for Volvo S60, V60 2.0T, T3, T4, T5, T6 2010–2018 – Simons
$ 822.00/pcs
Article number
We accept the following payment methods
Stainless Steel Sports Exhaust System for Volvo S60, V60 2.0T, T3, T4, T5, T6 2010–2018 – Simons
$ 822.00
Description
Stainless Steel Sports Exhaust System for Volvo S60, V60 2.0T, T3, T4, T5, T6 2010–2018 – Simons
Swedish-made sports exhaust system from Simons for Volvo S60 and V60 petrol models, both 2WD and AWD. Manufactured from stainless steel with dual polished 90 mm tailpipes that give the vehicle a sportier appearance and a deeper exhaust sound.
The exhaust system is installed after the front silencer and is designed to improve exhaust gas flow and reduce back pressure. Simons Sports Exhaust Systems deliver a sportier exhaust note without becoming intrusive during normal driving.
Fits the following Volvo models
Volvo S60 2.0T 2010–2018, 2WD and AWD
Volvo S60 T3 2010–2018, 2WD and AWD
Volvo S60 T4 2010–2018, 2WD and AWD
Volvo S60 T5 2010–2018, 2WD and AWD
Volvo S60 T6 2010–2018, 2WD and AWD
Volvo V60 2.0T 2010–2018, 2WD and AWD
Volvo V60 T3 2010–2018, 2WD and AWD
Volvo V60 T4 2010–2018, 2WD and AWD
Volvo V60 T5 2010–2018, 2WD and AWD
Volvo V60 T6 2010–2018, 2WD and AWD
Also fits R-Design models.
Specifications
Product type: Sports exhaust system
Manufacturer: Simons
Material: Stainless steel, SS Quality
Country of manufacture: Sweden
Position: After the front silencer
Pipe diameter: 76 mm + 2 × 63.5 mm
Tailpipes: Duplex, 2 × 90 mm, polished stainless steel
Design: Sports exhaust system with improved exhaust gas flow
Material and Quality
Simons SS Quality products are mainly manufactured from AISI 304 stainless steel (18/8 steel), offering good corrosion resistance. Certain internal components and mounting parts are made from other steel grades to combine durability with resistance to cracking.
The tailpipes are made from polished stainless steel. According to the manufacturer, the expected service life of SS Quality products is approximately 10–20 years, depending on use and operating conditions.
Important Information
This exhaust system is only intended for vehicles with a straight routing of the existing exhaust system. Check the configuration against the second product image before ordering.
On some models, the rear bumper spoiler does not have an opening for the right-hand tailpipe. In these cases, an opening must be made during installation.
The exhaust system also fits R-Design models, but check the design of the vehicle's rear bumper spoiler before ordering.
The exhaust system is primarily designed for left-hand drive vehicles. Fitment on right-hand drive vehicles has not been verified.
Discolouration of stainless steel at high temperatures and superficial surface rust may occur without normally affecting the product's durability.
Check the vehicle's engine version and existing exhaust system before ordering.
Product Information
Part number: 02DDBA1R
Fits the following cars
- Volvo S60 2.0T 2010–2018, 2WD and AWD
- Volvo S60 T3 2010–2018, 2WD and AWD
- Volvo S60 T4 2010–2018, 2WD and AWD
- Volvo S60 T5 2010–2018, 2WD and AWD
- Volvo S60 T6 2010–2018, 2WD and AWD
- Volvo V60 2.0T 2010–2018, 2WD and AWD
- Volvo V60 T3 2010–2018, 2WD and AWD
- Volvo V60 T4 2010–2018, 2WD and AWD
- Volvo V60 T5 2010–2018, 2WD and AWD
- Volvo V60 T6 2010–2018, 2WD and AWD
- Specifications
- Product typeSports exhaust system
- ManufacturerSimons
- MaterialStainless steel, SS Quality
- Country of manufactureSweden
- PositionAfter the front silencer
- Pipe diameter76 mm + 2 × 63.5 mm
- TailpipesDuplex, 2 × 90 mm, polished stainless steel
- DesignSports exhaust system with improved exhaust gas flow
- Material and Quality
- Important Information
- Product Information
- Part number02DDBA1R
Also fits R-Design models.
Simons SS Quality products are mainly manufactured from AISI 304 stainless steel (18/8 steel), offering good corrosion resistance. Certain internal components and mounting parts are made from other steel grades to combine durability with resistance to cracking.
The tailpipes are made from polished stainless steel. According to the manufacturer, the expected service life of SS Quality products is approximately 10–20 years, depending on use and operating conditions.
This exhaust system is only intended for vehicles with a straight routing of the existing exhaust system. Check the configuration against the second product image before ordering.
On some models, the rear bumper spoiler does not have an opening for the right-hand tailpipe. In these cases, an opening must be made during installation.
The exhaust system also fits R-Design models, but check the design of the vehicle's rear bumper spoiler before ordering.
The exhaust system is primarily designed for left-hand drive vehicles. Fitment on right-hand drive vehicles has not been verified.
Discolouration of stainless steel at high temperatures and superficial surface rust may occur without normally affecting the product's durability.
Check the vehicle's engine version and existing exhaust system before ordering.
Technical data
- Made in sweden
- Ja
Shipping
We ship your parts quickly and safely with trackable delivery.
- Delivery time and shipping options are shown at checkout.
- Shipping costs are calculated at checkout.
