Spring washer 1/4" 6.5x11.5x1.6 mm for Volvo Amazon
PV 444, Duett, PV 544, Amazon, 1800, 164, 780, S90
$ 0.23
- Model year:
- 1957–1974
- Axle:
- Front axle
- Dimensions:
- 6.5 × 11.5 × 1.6 mm
- Engine:
- B16, B18, B20
Rear light Volvo PV 544 (1958-66)
A cracked rubber seal lets moisture in behind the lens and causes green corrosion on the base, which is often the explanation for rear lights that flicker or go out. On the 544 it's also worth keeping an eye on the voltage: the car was built both with a 6-volt system and, from 1961, with 12 volts – the bulb base may look the same but the wattage differs, so a 6V bulb in a 12V car burns out quickly.
- Spring washer 1/4" 6.5x11.5x1.6 mm for Volvo Amazon
- Nut UNC 1/4-20 h=5.5 mm for Volvo Amazon, 1800
- Washer 6x22x1.5 for Volvo PV, Duett, Amazon, 164, 1800, 240, 260, 740, 760, 780, 850
- Screw RXS B6x9.5 cross recessed zinc plated
All products in category: Rear light Volvo PV 544 (1958-66)
Nut UNC 1/4-20 h=5.5 mm for Volvo Amazon, 1800
PV 444, PV 544, Duett, Amazon, 1800, 164
$ 0.23
- Model year:
- 1957–1974
- Thread:
- 1/4"-20 UNC
- Engine:
- B16, B18, B20
- System:
- Stromberg
Washer 6x22x1.5 for Volvo PV, Duett, Amazon, 164, 1800, 240, 260, 740, 760, 780, 850
PV 444, PV 544, Duett, Amazon, 1800, 164, 780
$ 0.11
- Model year:
- 1961–1982
- Engine:
- B18, B20, B27F
Screw RXS B6x9.5 cross recessed zinc plated
PV 444, Duett, PV 544, Amazon, 1800, 164, 780
$ 0.11
Fast delivery
1 year warranty
On all parts for your Volvo
90-day returns
90-day right of return from delivery
Volvo expertise since 1999
We're here for you and your Volvo
This group includes bulbs, rubber seals and bezels for the lights as well as wiring, gasket and mounting kits with screw, nut and washer. These are the same parts you go through when restoring the rear lighting – from bulb replacement and sealing to completely rewiring an aged cable. If you search for part numbers like 658398 or 658399, they belong in this group for the rear lighting.
During the job, typical checkpoints are to clean rust from the light mounting, replace brittle rubber and secure the ground point so the light becomes stable again.