About
Brake Disc without Hub Volvo Amazon / P1800 (1963–1970)
Front brake disc for Volvo Amazon and Volvo P1800. Supplied without hub and intended to be machined to the correct dimensions after installation.
Fits the following models
Volvo Amazon from mid-1963 to 1970
-
4-door from ch.no. 118304–
-
2-door from ch.no. 14342–
Volvo P1800 / P1800S 1963–1969 (ch.no. approx. 7000–30000)
Specifications
Diameter 269 mm
Thickness 15 mm
Minimum thickness 11.3 mm
Brake disc type solid
Center bore 84 mm
Number of bolt holes 5
Surface oiled
OEM / Reference number
666525-1
Information
The disc is supplied without hub and must be machined to the correct dimensions after installation.
New wheel studs must be installed during fitting.
Installation instructions
-
Ensure all contact surfaces are clean and free from dirt, rust, and grease
-
Check that calipers and brake pads move freely
-
Make sure the brake system and suspension are in good condition
-
Tighten wheel bolts/nuts evenly in a cross pattern using the correct torque
Important
-
Always replace brake discs in pairs on the same axle
-
Replacing only one disc may cause uneven braking performance
-
Always replace brake pads when installing new brake discs
-
Avoid heavy braking for the first approx. 300 km (200 miles) for proper bedding-in
-
⚠ Always follow the manufacturer’s instructions during installation. Verify model and configuration before ordering.
Brake disc for Volvo Amazon, Amazon Kombi -70, 1800 1963-69, without hub
OE no.
Article number
Brake Disc without Hub Volvo Amazon / P1800 (1963–1970)
Front brake disc for Volvo Amazon and Volvo P1800. Supplied without hub and intended to be machined to the correct dimensions after installation.
Fits the following models
Volvo Amazon from mid-1963 to 1970
-
4-door from ch.no. 118304–
-
2-door from ch.no. 14342–
Volvo P1800 / P1800S 1963–1969 (ch.no. approx. 7000–30000)
Specifications
Diameter 269 mm
Thickness 15 mm
Minimum thickness 11.3 mm
Brake disc type solid
Center bore 84 mm
Number of bolt holes 5
Surface oiled
OEM / Reference number
666525-1
Information
The disc is supplied without hub and must be machined to the correct dimensions after installation.
New wheel studs must be installed during fitting.
Installation instructions
-
Ensure all contact surfaces are clean and free from dirt, rust, and grease
-
Check that calipers and brake pads move freely
-
Make sure the brake system and suspension are in good condition
-
Tighten wheel bolts/nuts evenly in a cross pattern using the correct torque
Important
-
Always replace brake discs in pairs on the same axle
-
Replacing only one disc may cause uneven braking performance
-
Always replace brake pads when installing new brake discs
-
Avoid heavy braking for the first approx. 300 km (200 miles) for proper bedding-in
-
⚠ Always follow the manufacturer’s instructions during installation. Verify model and configuration before ordering.
We accept the following payment methods:



